• Practical small combination pliers specifically for confined spaces or as car-boot tool
• For flat and round material
• For medium-hard wire, 1.6 mm
• Similar to DIN ISO 5746
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles

• For the toughest requirements
• Combination pliers with a 60° angled head and specially offset teeth on the gripping faces
• Optimum utilisation of the power in one's hands
• No forced positioning of the hand
• For fatigue-free working over a long period
• High-grade GEDORE special hardened and tempered steel for high cutting performance and a long service life
• Induction-hardened precision cutting edges, hardness 63 - 65 HRC
• To cut all wire types including piano wire, 1.6 mm
• Hot-drop forged
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

• To DIN ISO 5746
• Reinforced type, for tough continuous operation
• Lay-on cutter box
• For flat and round material
• For medium-hard wire, 1.6 mm
• Induction-hardened precision cutting edges, hardness 62 - 64 HRC
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

• To DIN ISO 5746
• Universal model with slimline head, ideal for confined spaces
• Induction-hardened precision cutting edges, hardness 62 - 64 HRC
• For flat and round material
• For medium-hard wire, 1.6 mm
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

• To DIN ISO 5746
• For tough continuous use
• Good lever action for easy cutting
• Induction-hardened precision cutting edges, hardness 62 - 64 HRC
• For flat and round material
• To cut all wire types including piano wire, 1.6 mm
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

• Cutting edge with and without bevel
• Ideal for a wide range of materials
• Different models available: Swedish model, electrician's side cutter, American model, lever-action side cutter, power bolt cutter etc.
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

• Available with and without cutting edge
• Also available serrated
• available with and without cutting edge
• Practical multiple pliers with cutting edge for holding, cutting, insulation-stripping, crimping, squeezing

Mechanic's pliers in various designs:

• without wire cutter, straight pattern
• without wire cutter, offset pattern
• without wire cutter, angled pattern
• without wire cutter, 30° angled

• Fine-tipped nose

• Bowden cable cutter / wire rope cutter
• Chrome-plated wire rope cutter with easy-to-change cutting plates, cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process (Metal Injection Molding)
• Set of spares for wire rope cutter (consisting of 2 cutting plates, 2 screws , 1 TORX® cranked socket key)

• available in automatic and manual versions
• For stripping conductors and wires, 0.2 - 6 mm²
• V-shaped cutting jaws for stripping the plastic insulation of single and multi-strand conductors
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed

• For cutting single, multiple and fine-wire copper and aluminium cables of 10 - 50 mm²
• An easy, precise cut
• No cable squeezing or deformation

• For bending, straightening and assembly work in the electronic and precision mechanical sector
• GEDORE ESD electronic pliers dissipate electrostatic energy in a slow, controlled manner
• Also available as practical sets

• Made from high-performance hardened and tempered steel, handles hardened and tempered
• Induction-hardened cutting edges, 59-61 HRC, faces phosphated
• With opening spring
• 2-component handles with secure-grip hand protection

Grip wrenches in various designs

• With adjusting screw and release lever
• Grip wrench
• Grip wrench, long jaws
• Parallel jaw grip wrench (parallel clamping)
• Machine workbench clamp: For the fast and safe clamping of various workpieces, to fit tenon blocks with M8, M10 or M12 thread
• Grip c-clamp: For clamping extra high workpieces
• Wide jaw grip wrench: For clamping edges and surfaces
• Welder's grip wrench for tubes: For clamping tubes and round stock when welding - with cast steel jaws
• Grip wrench for glueing: For clamping lengthwise or corner joints of extremely long bases and surrounds, lintels, banisters and frames, arched windows, worktops, corner benches, etc.
• Profile-section grip wrench: for clamping bulky profile and angle sections, strong forged jaws

• Circlip pliers for external retaining rings (waves), internal retaining rings (drills), securing rings (parallel),
• X-GRIP Circlip pliers Universal circlip pliers for risk-free gripping and fitting of internal and external circlips (DIN 471/472) from 252 to 1000 mm diameter
• Forged GEDORE chrome-vanadium special hardened and tempered steel
• Precision machined, oil hardened and annealed

• Eck-Schwede-snap® Tried and tested best-seller with a powerful grip for more than 50 years
• The special additional flame hardening of the teeth increases and improves the grip and durability of the snap®
• The jaw form of the snap® reliably prevents the workpiece slipping out, and ensures maximum freedom of movement in confined spaces
• The curvature of the jaws adapts ideally to different profiles, enabling the snap® to grip hexagonal nuts - gently and securely
• Also available: American model and high-speed pipe wrench with screw adjuster and corner pipe wrenches

BOSS chain pipe wrench

• Ideal for use in hard-to-access areas
• Ratchet-type operation
• Plastic grip prevents hand from slipping off
• Handle in GEDORE chrome-vanadium special steel
• Drop forged
• Tempered, teeth additionally hardened
• Stove enamelled blue
• Spare chains available

Chain pipe wrench, American pattern

• High efficiency due to maximum lever action
• Hardened and tempered steel to EN 10083
• With hardened exchangeable jaws, toothed on both sides
• Stove enamelled blue

• Power bolt cutters with a highly effective cutting performance
• Optimum lever action requires less effort
• Wear-free rotating/thrust block bolt to reduce sliding friction when cutting
• Force optimised, joint-near cutting is guaranteed

• Practical pliers sets for lots of uses
• Produced in-house by GEDORE Austria
• Combination, flat-nosed, round-nosed and mechanics pliers made from GEDORE special hardened and tempered steel
• Side cutters and end cutting nippers made from GEDORE high-performance hardened and tempered steel
• Hot forged
• Precision machined, oil hardened and annealed
• Induction-hardened cutting edges